11ns, 6ns (Typ) SPST - NO 4Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG712 16 Pins 100pA 3V 16-TSSOP (0.173, 4.40mm Width)
SOT-23
ADG712BRU-REEL7 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
16-TSSOP (0.173, 4.40mm Width)
Number of Pins
16
Operating Temperature
-40°C~85°C TA
Packaging
Tape & Reel (TR)
JESD-609 Code
e0
Pbfree Code
no
Part Status
Obsolete
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
16
ECCN Code
EAR99
Resistance
4Ohm
Terminal Finish
Tin/Lead (Sn85Pb15)
Additional Feature
CAN ALSO OPERATE WITH 5 V SUPPLY
Subcategory
Multiplexer or Switches
Max Power Dissipation
5μW
Technology
CMOS
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
240
Number of Functions
4
Supply Voltage
3V
Terminal Pitch
0.65mm
Reach Compliance Code
not_compliant
[email protected] Reflow Temperature-Max (s)
30
Base Part Number
ADG712
Output
SEPARATE OUTPUT
Pin Count
16
Qualification Status
Not Qualified
Power Supplies
3/5V
Number of Channels
4
Interface
Parallel
Max Supply Voltage
5.5V
Min Supply Voltage
1.8V
Operating Supply Current
1nA
Power Dissipation
5μW
Max Supply Current
1μA
Throw Configuration
SPST
Turn On Delay Time
11 ns
Supply Type
Single
Bandwidth
200MHz
Turn-Off Delay Time
6 ns
On-State Resistance (Max)
4Ohm
Multiplexer/Demultiplexer Circuit
1:1
Off-state Isolation-Nom
58 dB
Current - Leakage (IS(off)) (Max)
100pA
Channel Capacitance (CS(off), CD(off))
10pF 10pF
On-state Resistance Match-Nom
0.1Ohm
Switch Circuit
SPST - NO
Switch Time (Ton, Toff) (Max)
11ns, 6ns (Typ)
Charge Injection
3pC
Crosstalk
-90dB @ 10MHz
Switching
BREAK-BEFORE-MAKE
Switch-on Time-Max
20ns
Switch-off Time-Max
12ns
Voltage - Supply, Single (V+)
1.8V~5.5V
Normal Position
NO
Height Seated (Max)
1.2mm
Length
5mm
RoHS Status
Non-RoHS Compliant
Lead Free
Contains Lead
Pricing & Ordering
Quantity
Unit Price
Ext. Price
1
$8.084245
$8.084245
10
$7.626646
$76.26646
100
$7.194949
$719.4949
500
$6.787688
$3393.844
1000
$6.403479
$6403.479
ADG712BRU-REEL7 Product Details
ADG712BRU-REEL7 Overview
Shipping overseas is convenient with the electronic component packed in 16-TSSOP (0.173, 4.40mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. Multiplexer and demultiplexer circuits have a number 1:1. Operation at a temperature around -40°C~85°C TA. Total terminations are 16. By its 4 channels, the electronic component provides high-quality output. When a voltage supply of 3V is used, the electronic component should be turned on and run. 16 pins are injected to the electronic part body. SPST - NO switching circuits are used in these analog switch ics. Search with ADG712 if you are looking for analog multiplexer variants. Analog switches have 4Ohm internal resistance. To find out what the functions of 16 pins are, please refer to their datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. Users should never supply a voltage higher than 5.5V to a switch device. Single supply type digital switch with a low cost. It is recommended that the electrical component receives a voltage of 1.8V. It would be sufficient to run this analogue multiplexer with 1nA current. Using a single voltage supply, this switch device consumes 1.8V~5.5V volts. Put voltage above 1μA on the multiplexer to cause damage. SEPARATE OUTPUT outputs are utilized by this digital multiplexer. The data can be transferred over a wide range of bandwidths, called 200MHz bandwidths. This electronic part has additional features, such as: CAN ALSO OPERATE WITH 5 V SUPPLY.
ADG712BRU-REEL7 Features
4 Channels Switch Circuit: SPST - NO 1nA Supply Current Bandwidth: 200MHz Additional Features: CAN ALSO OPERATE WITH 5 V SUPPLY
ADG712BRU-REEL7 Applications
There are a lot of Analog Devices Inc. ADG712BRU-REEL7 Analog Switches & Multiplexers ICs applications.