Welcome to Hotenda.com Online Store!

logo
userjoin
Home

ADG714BRUZ-REEL7

ADG714BRUZ-REEL7

ADG714BRUZ-REEL7

Analog Devices Inc.

20ns, 8ns (Typ) SPST - NO 4.5Ohm Analog Switches BREAK-BEFORE-MAKE ADG714 24 Pins 100pA 2.5V 24-TSSOP (0.173, 4.40mm Width)

SOT-23

ADG714BRUZ-REEL7 Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Factory Lead Time 26 Weeks
Lifecycle Status PRODUCTION (Last Updated: 4 weeks ago)
Contact Plating Tin
Mounting Type Surface Mount
Package / Case 24-TSSOP (0.173, 4.40mm Width)
Surface Mount YES
Number of Pins 24
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
JESD-609 Code e3
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 24
ECCN Code EAR99
Resistance 4.5Ohm
Subcategory Multiplexer or Switches
Max Power Dissipation 125μW
Technology CMOS
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 8
Supply Voltage 2.5V
Terminal Pitch 0.65mm
Frequency 30MHz
[email protected] Reflow Temperature-Max (s) 40
Base Part Number ADG714
Pin Count 24
Number of Outputs 1
Power Supplies 3/5/+-3V
Number of Channels 8
Interface Serial
Max Supply Voltage 5.5V
Min Supply Voltage 2.7V
Operating Supply Current 10μA
Nominal Supply Current 30mA
Power Dissipation 125μW
Max Supply Current 20μA
Throw Configuration SPST
Turn On Delay Time 32 ns
Voltage - Supply, Single/Dual (±) 2.7V~5.5V ±2.5V
Supply Type Dual, Single
Bandwidth 155MHz
Neg Supply Voltage-Nom (Vsup) -2.5V
Turn-Off Delay Time 15 ns
Max Dual Supply Voltage 2.75V
On-State Resistance (Max) 4.5Ohm
Min Dual Supply Voltage 2.25V
High Level Output Current 30mA
Dual Supply Voltage 2.5V
Multiplexer/Demultiplexer Circuit 1:1
Off-state Isolation-Nom 60 dB
Current - Leakage (IS(off)) (Max) 100pA
Channel Capacitance (CS(off), CD(off)) 11pF 11pF
On-state Resistance Match-Nom 0.4Ohm
Switch Circuit SPST - NO
Switch Time (Ton, Toff) (Max) 20ns, 8ns (Typ)
Charge Injection 3pC
Crosstalk -90dB @ 1MHz
Switching BREAK-BEFORE-MAKE
Max Junction Temperature (Tj) 150°C
Normal Position NC
Height 1.2mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Contains Lead
Pricing & Ordering
Quantity Unit Price Ext. Price
1 $5.355997 $5.355997
10 $5.052827 $50.52827
100 $4.766818 $476.6818
500 $4.496998 $2248.499
1000 $4.242451 $4242.451
ADG714BRUZ-REEL7 Product Details

ADG714BRUZ-REEL7 Overview


Due to its 24-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. High reliability is ensured by the advanced packaging method Tape & Reel (TR). It is mounted in the position Surface Mount. Multiplexers and demultiplexers have the same number of circuits 1:1. Extended operating temperature around -40°C~85°C TA. Totally, there are 24 terminations. A 8 channel electronic part produces high-quality output. If the voltage supply is 2.5V volts, the electrical component should be turned on and run. This electronic part can be found in the 24 series. On the other hand, analog switches can be constructed using SPST - NO switching circuits. Try searching for the analog switch ic with ADG714 if you are looking for variants. In this multiplexer, the internal resistance is 4.5Ohm. For functions related to 24 pins, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. Users shouldn't supply more than 5.5V voltage to the switch device. Dual, Single supply type digital switch with a low cost. 2.7V is the lowest voltage that should be fed to the electronic electronic part. For this multiplexer to operate, 10μA current would be sufficient. Putting voltage greater than 20μA on the multiplexer may cause damage. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 2.75V. If you are using a dual power supply, you should attach at least 2.25V. The transfer of data can be performed over 155MHz bandwidths. An output of 1 is provided by the digital multiplexer.

ADG714BRUZ-REEL7 Features


8 Channels
Switch Circuit: SPST - NO
10μA Supply Current
Bandwidth: 155MHz

ADG714BRUZ-REEL7 Applications


There are a lot of Analog Devices Inc. ADG714BRUZ-REEL7 Analog Switches & Multiplexers ICs applications.

  • Audio and video routing
  • Isolation
  • PBXs
  • E1 Network Equipment
  • Channelized and Unchannelized DS3 applications
  • ATM
  • Switching Systems
  • Data Acquisition Systems
  • Audio signal routing
  • Intelligent PBX

Related Part Number

Get Subscriber

Enter Your Email Address, Get the Latest News