ADG719BRTZ-500RL7 Overview

Packed in SOT-23-6, the electronic component is convenient for shipping overseas. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. Multiplexer and demultiplexer circuits have a number 2:1. Around -40°C~125°C TA is the extended operating temperature. Totally, there are 6 terminations. A high-quality output is provided by the electrical component's 1 channels. Turning on and running the electrical part should be easy with a 3V voltage supply. This electronic part can be found in the 6 series. On the other hand, analog switches can be constructed using SPDT switching circuits. Try searching for the analog switch ic with ADG719 if you are looking for variants. An switch multiplexer with 4Ohm internal resistance has a value of 4Ohm. Datasheets for 6 pin functions are available upon request. This switch device is a typical Multiplexer or Switches. Users should never supply a voltage higher than 5.5V to a switch device. Analogue multiplexers of the Single supply type that are cost-effective. 1.8V is the lowest voltage the electrical component should receive. 1nA current would be enough for this multiplexer to operate. Draining from a single voltage supply, this analog switch requires a voltage of 1.8V~5.5V. Putting voltage greater than 1μA on the multiplexer may cause damage. A 200MHz-bandwidth can be used for data transfer. 2 outputs are included in the analogue multiplexer.

ADG719BRTZ-500RL7 Features

1 Channels
Switch Circuit: SPDT
1nA Supply Current
Bandwidth: 200MHz

ADG719BRTZ-500RL7 Applications

There are a lot of Analog Devices Inc. ADG719BRTZ-500RL7 Analog Switches & Multiplexers ICs applications.

• Microprocessor Controlled Analog Systems
• Power routing
• Routers
• Audio and video switching
• Battery Powered Instruments
• MP3 players
• High-Voltage
• RGB switches
• Cable PC
• Automotive applications