As the electronic part is packed in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width), international shipping is convenient. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). Surface Mount is where this multiplexer is located. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Temperatures around -40°C~85°C TA are extended for operation. Total terminations are 8. Due to its 2 channels, the electrical component produces high-quality output. Turning on and running the electrical part should be easy with a 3V voltage supply. The electrical component body receives 8 pins. A SPST - NC switching circuit is used to build these analog multiplexers. If you are looking for variants of the digital switch, trying search with ADG722. The internal resistance of this digital multiplexer is 4Ohm. Datasheets for functions of 8 pins are available. Theswitch device is a typical Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. Digital switch that provides Single power at a cost-effective price. It is recommended that the electrical component receives a voltage of 1.8V. An operating current of 1nA would be sufficient for this switch device. Draining from a single voltage supply, this analog switch requires a voltage of 1.8V~5.5V. If put voltage greater than 1μA on the device, damage may be caused to the analogue multiplexer. A 200MHz-bandwidth can be used for data transfer. You shouldn't miss the additional features of the electrical component, such as: ALSO OPEARTES AT 5 V SUPPLY.
ADG722BRMZ-REEL7 Features
2 Channels Switch Circuit: SPST - NC 1nA Supply Current Bandwidth: 200MHz Additional Features: ALSO OPEARTES AT 5 V SUPPLY
ADG722BRMZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG722BRMZ-REEL7 Analog Switches & Multiplexers ICs applications.