ADG723BRMZ Overview

Packed in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width), the electronic component is convenient for shipping overseas. This high-reliability packaging method uses advanced packaging methods Tube. In Surface Mount, this analog switch is mounted. Multiplexer and demultiplexer circuits have a number 1:1. Around -40°C~85°C TA is the extended operating temperature. Total terminations are 8. A high-quality output is provided by the electrical component's 2 channels. Powered by a 3V voltage supply, the electrical part should be switched on and run. 8 pins are injected to the electronic part body. SPST - NO/NC switching circuits are used in these analog switch ics. Using the ADG723 search parameter, you can discover variants of the switch. In this multiplexer, the internal resistance is 4Ohm. For functions related to 8 pins, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. normally, users should not supply switches with voltages higher than 5.5V. It is recommended that the electrical component receives a voltage of 1.8V. This analog switch requires a voltage of 1.8V~5.5V to drain from a single voltage supply. Putting voltage greater than 1μA on the multiplexer may cause damage. In 200MHz-bandwidths, data can be transferred. Don't miss this electronic component's additional features, such as: ALSO OPEARTES AT 5 V SUPPLY. The Drain to Source resistance of this electronic component is 4Ohm.

ADG723BRMZ Features

2 Channels
Switch Circuit: SPST - NO/NC
Bandwidth: 200MHz
Additional Features: ALSO OPEARTES AT 5 V SUPPLY
Drain-to-Source resistance: 4Ohm

ADG723BRMZ Applications

There are a lot of Analog Devices Inc. ADG723BRMZ Analog Switches & Multiplexers ICs applications.

• Transmit
• Digital access cross connects
• SONET
• E1 Multiplexer
• E1 Network Equipment
• Audio and video routing
• PBXs
• Avionics and Military Systems
• Battery-powered systems
• Central office