ADG731BCPZ-REEL7 Overview

This electronic part is conveniently packaged in 48-VFQFN Exposed Pad, CSP, making it easy to ship abroad. High reliability is provided by advanced packaging method Tape & Reel (TR). This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have a number of circuits 32:1. Operation at a temperature around -40°C~85°C TA. The total number of terminations is 48. The electronic part provides high-quality output because it has 32 channels. In the case of a voltage supply of 2.5V volts, the electrical part can be powered up and run. A total of 48 pins are injected into the electrical part body. There are 1 circuits in this switch device. Try searching with ADG731 to find analog multiplexer variants. An switch multiplexer with 5.5Ohm internal resistance has a value of 5.5Ohm. To find out what the 48 pins do, please refer to the datasheets. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. The analog switch ic is of the Dual, Single supply type and is cost-effective. There should be 1.8V voltage fed to the electrical part below 1.8V. The analogue multiplexer could operate on 10μA current. Operating voltages range from 5V. There are various bandwidths available for data transfer.

ADG731BCPZ-REEL7 Features

32 Channels
10μA Supply Current
Bandwidth: 18MHz

ADG731BCPZ-REEL7 Applications

There are a lot of Analog Devices Inc. ADG731BCPZ-REEL7 Analog Switches & Multiplexers ICs applications.

• Medical Instrumentation
• SDH/SONET multiplexers
• Cable Modem
• Digital cross connects (DSX-1)
• Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
• Existing multiplexer applications (both fault-protected and nonfault-protected)
• Precision test equipment
• Avionics
• DSUs
• Remote wireless modules