ADG738BRU Overview

As the electronic part is packed in 16-TSSOP (0.173, 4.40mm Width), international shipping is convenient. In order to provide high reliability, an advanced packaging method Tube is used. Surface Mount is where this multiplexer is located. In the multiplexer and demultiplexer, 8:1 represents the number of circuits. The operating temperature is extended to around -40°C~85°C TA. 16 terminations have been made so far. This electronic part offers high-quality output due to its 8 channels. An 3V voltage supply should allow the electrical part to be turned on and run. Electronic part bodies are injected with 16 pins. The circuits in this analogue multiplexer number 1. Look for analog switch ic variants by searching with ADG738. It has an internal resistance of 4.5Ohm. For details about the functions of 16 pins, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. Users shouldn't supply more than 5.5V voltage to the switch device. 2.7V is the lowest voltage the electrical component should receive. This analogue multiplexer requires a voltage of 2.7V~5.5V when it drains from a single voltage supply. It is integrated with AUDIO/VIDEO SWITCH analog ICs. This electrical part is compatible with 5V operating voltages. 65MHz bandwidths enable data to be transferred.

ADG738BRU Features

8 Channels
Bandwidth: 65MHz

ADG738BRU Applications

There are a lot of Analog Devices Inc. ADG738BRU Analog Switches & Multiplexers ICs applications.

• Medical Instrumentation
• Voice over IP/DSL – Integrated Access Devices, Smart
• Digital cross connects (DSX-1)
• Precision instrumentation
• Fault Tolerant Systems
• 65 V DACs
• CSU
• Remote wireless modules
• Video signal routing
• High reliability control systems