ADG738BRU-REEL Overview

The electrical component comes in 16-TSSOP (0.173, 4.40mm Width) packaging, which makes it convenient to ship overseas. High reliability is achieved by using advanced packaging method Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. There is 8:1 ratio between the number of multiplexers and demultiplexers. The operating temperature is extended to around -40°C~85°C TA. The total number of terminations is 16. A electrical component with 8 channels is capable of high-quality output. It is safe to turn on and run the electronic component with a 3V voltage supply. Into the electrical component body are injected 16 pins. A total of 1 circuits make up this switch device. ADG738 can be used to search for analog multiplexer variants. The internal resistance of this digital multiplexer is 4.5Ohm. The datasheets for the 16 pins explain the functions. The analog multiplexer shown here is a typical Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. There should be 2.7V voltage fed to the electrical part below 2.7V. Using only a single voltage supply, this analog switch requires 2.7V~5.5V voltage. This product is integrated with an analog integrated circuit (IC) of type AUDIO/VIDEO SWITCH. In order to operate the 8 inputs, there are several steps to follow.

ADG738BRU-REEL Features

8 Channels
-3db Bandwidth: 65MHz

ADG738BRU-REEL Applications

There are a lot of Analog Devices Inc. ADG738BRU-REEL Analog Switches & Multiplexers ICs applications.

• SDH
• Wireless Local Loop
• Digital Cross-Connects
• Communication systems
• Mechanical reed relay replacement
• Automotive applications
• Video signal routing
• Existing multiplexer applications (both fault-protected and nonfault-protected)
• Avionics test equipment
• Residential Gateways, Home Gateway/Router