This electronic part is conveniently packaged in 16-TSSOP (0.173, 4.40mm Width), making it easy to ship abroad. This high-reliability packaging method uses advanced packaging methods Tube. A switch device like this is mounted in Surface Mount. 8:1 is the ratio of multiplexer to demultiplexer circuits. An extended operating temperature of -40°C~85°C TA degrees Celsius. In total, there have been 16 terminations. A 8 channel electronic part produces high-quality output. A 3V voltage supply should turn on and run the electronic component. An injection of 16 pins is performed into the body of the electrical component. 1 circuits are used in this analogue multiplexer. Try searching for ADG738 variants of the analog switch ic. Analog switches have 4.5Ohm internal resistance. To find out what the 16 pins do, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. Users should never supply a voltage higher than 5.5V to a switch device. There should be 2.7V voltage fed to the electrical part below 2.7V. It would be sufficient to run this analogue multiplexer with 10μA current. A voltage of 2.7V~5.5V is required for this switch device, which drains from a single voltage source. The switch multiplexer may be damaged if it is exposed to voltage greater than 20μA. This product is integrated with an analog integrated circuit (IC) of type AUDIO/VIDEO SWITCH. Operating voltages of 5V are compatible with the electrical part. In order to operate the 8 inputs, there are several steps to follow. In 65MHz-bandwidths, data can be transferred. Resistivity from Drain to Source is 2.5Ohm for this electronic part.
ADG738BRUZ Features
8 Channels 10μA Supply Current Bandwidth: 65MHz Drain-to-Source resistance: 2.5Ohm
ADG738BRUZ Applications
There are a lot of Analog Devices Inc. ADG738BRUZ Analog Switches & Multiplexers ICs applications.