Presented in 10-UFQFN, this electrical component is convenient for overseas shipping. High reliability is ensured by the advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. Multiplexer and demultiplexer circuits have a number 2:1. Increasing operating temperature to around -40°C~85°C TA. Totally, there are 10 terminations. A high-quality output is provided by the electrical component's 1 channels. It is safe to turn on and run the electronic component with a 3V voltage supply. A total of 10 pins are injected into the electrical part body. A SPDT switching circuit is used for these analog switches. Using the DG2736 search parameter, you can discover variants of the switch. In this multiplexer, the internal resistance is 500mOhm. For details about the functions of 10 pins, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. It is generally not recommended to supply a voltage higher than 4.3V to the switch device in normal circumstances. The digital multiplexer has a low cost Single supply. 1.65V is the lowest voltage the electrical component should receive. For this digital switch to work, 1μA current would suffice. An analogue multiplexer drains from a single voltage supply at 1.65V~4.3V. Putting voltage greater than 1μA on the multiplexer may cause damage. The 2 inputs need to be operated in order to work. In this digital multiplexer, there are 4 outputs.