ADG739BRUZ Overview

Shipping overseas is convenient due to the electrical component's packing in 16-TSSOP (0.173, 4.40mm Width). Advanced packaging method Tube is used to provide high reliability. In Surface Mount, you'll find this switch device. 4:1 is the ratio of multiplexer to demultiplexer circuits. Operational temperature extended around -40°C~85°C TA. 16 terminations have been made so far. A 4 channel electronic part produces high-quality output. When the electronic component is given a voltage of 3V, it should be turned on and run. A key feature of the 16 series is the inclusion of this electronic part as part of its design. SP4T switching circuits are used in these analog switch ics. A total of 2 circuits make up this switch device. Try searching for the analog switch ic with ADG739 if you are looking for variants. In this multiplexer, the internal resistance is 4.5Ohm. The datasheets for the 16 pins explain the functions. A voltage higher than 5.5V should not normally be supplied to the switches. 2.7V is the lowest voltage that should be fed to the electronic electronic part. This digital switch can be operated with a current of 10μA. The voltage required by this switch device is 2.7V~5.5V, draining from a single voltage supply. When the digital multiplexer is charged above 20μA, damage can occur. There is an integrated analog IC AUDIO/VIDEO SWITCH in the module. The 8 inputs need to be operated in order to work. 100MHz bandwidths enable data to be transferred. Drain to Source resistance is 2.5Ohm.

ADG739BRUZ Features

4 Channels
Switch Circuit: SP4T
10μA Supply Current
Bandwidth: 100MHz
Drain-to-Source resistance: 2.5Ohm

ADG739BRUZ Applications

There are a lot of Analog Devices Inc. ADG739BRUZ Analog Switches & Multiplexers ICs applications.

• Relay replacements
• Medical systems
• Communication systems
• MP3 players
• Remote Powered Equipment
• Channelized and Unchannelized DS3 applications
• Modems
• Access Concentrators
• Battery Powered Instruments
• 65 V DACs