ADG742BKSZ-R2 Overview

The electrical component comes in 6-TSSOP, SC-88, SOT-363 packaging, which makes it convenient to ship overseas. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have a ratio of 1:1. Temperatures around -40°C~85°C TA are extended for operation. 6 terminations have been made so far. A high-quality output is provided by the electrical component's 1 channels. When a voltage supply of 3V is used, the electronic component should be turned on and run. As part of the design of the 6 series, this electronic part has been incorporated into the system. Circuits based on SPST - NC switching are used to construct these analog switch ics. Try searching for the analog switch ic with ADG742 if you are looking for variants. There is 3Ohm internal resistance in this digital multiplexer. Please refer to the datasheets for 6 pins functions. A analogue multiplexer of this type is a Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. The analog switch ic is of the Single supply type and is cost-effective. There should be 1.8V voltage fed to the electrical part below 1.8V. An analogue multiplexer drains from a single voltage supply at 1.8V~5.5V. If put voltage greater than 1μA on the device, damage may be caused to the analogue multiplexer. You shouldn't miss the additional features of the electrical component, such as: CAN ALSO OPERATE WITH 5 VOLT SUPPLY. There is 4Ohm resistance between Drain and Source for this electronic part.

ADG742BKSZ-R2 Features

1 Channels
Switch Circuit: SPST - NC
-3db Bandwidth: 200MHz
Additional Features: CAN ALSO OPERATE WITH 5 VOLT SUPPLY
Drain-to-Source resistance: 4Ohm

ADG742BKSZ-R2 Applications

There are a lot of Analog Devices Inc. ADG742BKSZ-R2 Analog Switches & Multiplexers ICs applications.

• Relay replacements
• Wireless Local Loop
• High speed data transmission line cards
• Medical systems
• DSUs
• Remote Powered Equipment
• Battery Powered Instruments
• Cell phones
• Video signal routing
• Optical Applications