DG442BDY-E3 Overview

The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.154, 3.90mm Width). The advanced packaging method Tube provides high reliability. It is mounted in the position Surface Mount. 1:1 is the ratio between multiplexers and demultiplexers. The operating temperature is extended to around -40°C~85°C TA. The total number of terminations is 16. As a result of its 1 channels, this electronic component provides high-quality output. An 15V voltage supply should allow the electrical part to be turned on and run. A total of 16 pins are injected into the body of the electronic part. Based on SPST - NO switching circuits, these analog multiplexers work. Use DG442 to search for variants of the digital switches. The internal resistance of this digital multiplexer is 90Ohm. Datasheets for functions of 16 pins are available. Multiplexer or Switches is a typical switch device. normally, users should not supply switches with voltages higher than 25V. Analogue multiplexer with a Dual, Single supply type that is cost-effective. A low voltage of 13V should be applied to the electronic component. This multiplexer would work with 5μA current. If you put voltage higher than 1μA on the digital multiplexer, damage may occur. For this multiplexer, dual supply voltage is feasible, but it should not exceed 22V. A dual power supply should have at least 7V voltage attached. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. A 4 input needs to be operated.

DG442BDY-E3 Features

1 Channels
Switch Circuit: SPST - NO
5μA Supply Current

DG442BDY-E3 Applications

There are a lot of Vishay Siliconix
DG442BDY-E3 Analog Switches & Multiplexers ICs applications.

• Low-Voltage
• Isolation
• Medical
• Imaging
• Ultrasound
• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems