ADG779BKSZ-REEL7 Overview

Shipping overseas is convenient with the electronic component packed in 6-TSSOP, SC-88, SOT-363. High reliability is provided by advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a ratio of 2:1. Temperatures around -40°C~85°C TA are extended for operation. Total terminations are 6. High-quality output is provided by the electronic component's 1 channels. If the voltage supply is 3V volts, the electrical component should be turned on and run. The electronic part body is injected with 6 pins. A SPDT switching circuit is used to build these analog multiplexers. Try searching with ADG779 if you're looking for variants. There is 5Ohm internal resistance in this digital multiplexer. For functions related to 6 pins, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. A voltage higher than 5.5V should not normally be supplied to the switches. Analogue multiplexers of the Single supply type that are cost-effective. 1.8V should be the lowest voltage fed to the electronic component. This analog switch requires a voltage of 1.8V~5.5V to drain from a single voltage supply. The analogue multiplexer may be damaged if voltage is greater than 1μA. A 200MHz-bandwidth can be used for data transfer. Drain to Source resistance is 2.5Ohm. The analogue multiplexer has 2 outputs.

ADG779BKSZ-REEL7 Features

1 Channels
Switch Circuit: SPDT
Bandwidth: 200MHz
Drain-to-Source resistance: 2.5Ohm

ADG779BKSZ-REEL7 Applications

There are a lot of Analog Devices Inc.
ADG779BKSZ-REEL7 Analog Switches & Multiplexers ICs applications.

• Transmit
• Low-Voltage
• Isolation
• Medical
• Imaging
• Ultrasound
• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems