ADG802BRT-REEL Overview

Presented in SOT-23-6, this electrical component is convenient for overseas shipping. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). In Surface Mount, you'll find this switch device. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. An extended operating temperature of -40°C~125°C TA degrees Celsius. In total, there have been 6 terminations. By its 1 channels, the electronic component provides high-quality output. Turning on and running the electrical part should be easy with a 3V voltage supply. The electronic part body is injected with 6 pins. These analog multiplexers are built based on SPST - NC switching circuits. It consists of 1 circuits. ADG802 can be used to search for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 300mOhm. Please refer to the datasheets for 6 pins functions. This switch device is a typical Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. Analogue multiplexer with a Single supply type that is cost-effective. The lowest voltage fed to the electronic component should be 1.8V. Analogue multiplexers require a 1.8V~5.5V voltage to drain from a single voltage supply. It may damage the digital multiplexer if the voltage is higher than 1μA.

ADG802BRT-REEL Features

1 Channels
Switch Circuit: SPST - NC
-3db Bandwidth: 12MHz

ADG802BRT-REEL Applications

There are a lot of Analog Devices Inc. ADG802BRT-REEL Analog Switches & Multiplexers ICs applications.

• Data switching
• Mechanical reed relay replacement
• Transmit
• Medical systems
• Battery Powered Systems
• Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
• Industrial control systems
• Wireless Local Loop
• HDTV
• SDH