ADG812YRUZ Overview

Due to its 16-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. Advanced packaging method Tube is used to provide high reliability. Surface Mount is where this multiplexer is located. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Operating temperature extended to -40°C~125°C TA. Total terminations are 16. The electronic part provides high-quality output because it has 4 channels. In the case of a voltage supply of 2.5V volts, the electrical part can be powered up and run. A total of 16 pins are injected into the body of the electronic part. Unlike digital switches, these are based on SPST - NO switching circuits. Try searching with ADG812 to find analog multiplexer variants. As far as internal resistance is concerned, it has 650mOhm. For functions related to 16 pins, please refer to the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 3.6V to the switch device in normal circumstances. Analog switch ics with Single supply type are cost-effective. 1.65V is the lowest voltage that should be fed to the electronic electronic part. This analogue multiplexer requires a voltage of 1.65V~3.6V when it drains from a single voltage supply. It may damage the digital multiplexer if the voltage is higher than 4μA. 3V operating voltages can be used with this electrical part. 90MHz-bandwidths can be used to transfer data between multiplexers.

ADG812YRUZ Features

4 Channels
Switch Circuit: SPST - NO
Bandwidth: 90MHz

ADG812YRUZ Applications

There are a lot of Analog Devices Inc. ADG812YRUZ Analog Switches & Multiplexers ICs applications.

• Video signal routing
• PBXs
• Remote wireless modules
• ISDN NT1/TA
• Channel Banks
• T1/E1 Terminals
• Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
• Cable PC
• Remote Powered Equipment
• Audio and video switching