ADG836LYRMZ-REEL7 Overview

Presented in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width), this electrical component is convenient for overseas shipping. High reliability is achieved by using advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. 2:1 is the ratio between multiplexers and demultiplexers. Increasing operating temperature to around -40°C~125°C TA. In total, there are 10 terminations. Due to its 2 channels, the electrical component produces high-quality output. In the case of a voltage supply of 2.7V volts, the electrical part can be powered up and run. A total of 10 pins are injected into the body of the electronic part. Circuits based on SPDT switching are used to construct these analog switch ics. Try searching with ADG836 if you're looking for variants. This digital multiplexer has 650mOhm internal resistance. Datasheets for functions of 10 pins are available. There is a standard Multiplexer or Switches analogue multiplexer here. An abnormal situation would be for the switch device to be supplied with a voltage greater than 3.6V. An effective Single supply digital multiplexer. The lowest voltage the electronic part should receive is 1.65V. An analogue multiplexer drains from a single voltage supply at 1.65V~3.6V. The switch multiplexer may be damaged if it is exposed to voltage greater than 1μA. There are 4 outputs on the analogue multiplexer.

ADG836LYRMZ-REEL7 Features

2 Channels
Switch Circuit: SPDT
-3db Bandwidth: 57MHz

ADG836LYRMZ-REEL7 Applications

There are a lot of Analog Devices Inc. ADG836LYRMZ-REEL7 Analog Switches & Multiplexers ICs applications.

• Intelligent PBX
• Cellular phones
• ATM
• Avionics
• Precision data acquisition
• High speed data transmission line cards
• Cell phones
• E1 Network Equipment
• Residential Gateways, Home Gateway/Router
• Communications systems