Welcome to Hotenda.com Online Store!

logo
userjoin
Home

74HCT4852D,112

74HCT4852D,112

74HCT4852D,112

Nexperia USA Inc.

25ns, 80ns SP4T 210Ohm Analog Switches 74HCT4852 16 Pins 100nA 16-SOIC (0.154, 3.90mm Width)

SOT-23

74HCT4852D,112 Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Factory Lead Time 8 Weeks
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154, 3.90mm Width)
Number of Pins 16
Operating Temperature -40°C~125°C TA
Packaging Tube
Published 2008
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Resistance 210Ohm
Base Part Number 74HCT4852
Pin Count 16
Operating Supply Voltage 5V
Number of Circuits 2
Max Supply Voltage 5.5V
Min Supply Voltage 4.5V
Operating Supply Current 2μA
Power Dissipation 500mW
Logic Function Demultiplexer, Multiplexer
Number of Inputs 8
Supply Type Single
On-State Resistance (Max) 210Ohm
Multiplexer/Demultiplexer Circuit 4:1
Current - Leakage (IS(off)) (Max) 100nA
Channel Capacitance (CS(off), CD(off)) 10pF
Switch Circuit SP4T
Switch Time (Ton, Toff) (Max) 25ns, 80ns
Channel-to-Channel Matching (ΔRon) 2 Ω
Voltage - Supply, Single (V+) 4.5V~5.5V
Radiation Hardening No
RoHS Status RoHS Compliant
74HCT4852D,112 Product Details

74HCT4852D,112 Overview


Due to its 16-SOIC (0.154, 3.90mm Width) packaging, the electronic part is convenient for international shipping. The advanced packaging method Tube provides high reliability. It is mounted in the position Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 4:1. Operating temperature extended to -40°C~125°C TA. An injection of 16 pins is performed into the body of the electrical component. On the other hand, analog switches can be constructed using SP4T switching circuits. Circuits number 2 make up this analogue multiplexer. Look for analog switch ic variants by searching with 74HCT4852. This digital multiplexer has 210Ohm internal resistance. The functions of 16 pins can be found in the datasheets. normally, users should not supply switches with voltages higher than 5.5V. An effective Single supply digital multiplexer. In order for the electronic part to function properly, the lowest voltage should be 4.5V. The switch device would be able to operate with 2μA current. A voltage of 4.5V~5.5V is required to drain this analog switch from a single voltage supply. 5V operating voltages are supported by the electronic component. The 8 inputs need to be operated in order to work.

74HCT4852D,112 Features


Switch Circuit: SP4T
2μA Supply Current

74HCT4852D,112 Applications


There are a lot of Nexperia USA Inc. 74HCT4852D,112 Analog Switches & Multiplexers ICs applications.

  • PCMCIA cards
  • Fiber In The Loop (FITL)
  • Battery Powered Instruments
  • Precision data acquisition
  • Cable Modem
  • Existing multiplexer applications (both fault-protected and nonfault-protected)
  • Digital access cross connects
  • High reliability control systems
  • Microwave transmission systems
  • Sample hold systems

Related Part Number

Get Subscriber

Enter Your Email Address, Get the Latest News