ADG839YKSZ-500RL7 Overview

Shipping overseas is convenient with the electronic component packed in 6-TSSOP, SC-88, SOT-363. High reliability is provided by advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a ratio of 2:1. Temperatures around -40°C~125°C TA are extended for operation. Total terminations are 6. High-quality output is provided by the electronic component's 1 channels. If the voltage supply is 2.5V volts, the electrical component should be turned on and run. An electrical component like this is included in the 6 series. A SPDT switching circuit is used to build these analog multiplexers. Try searching with ADG839 if you're looking for variants. There is 500mOhm internal resistance in this digital multiplexer. For functions related to 6 pins, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. A voltage higher than 3.6V should not normally be supplied to the switches. Analogue multiplexers of the Single supply type that are cost-effective. 1.65V should be the lowest voltage fed to the electronic component. This analog switch requires a voltage of 1.65V~3.6V to drain from a single voltage supply. The analogue multiplexer may be damaged if voltage is greater than 1μA. 3.6V operating voltages are supported by the electronic component. A 25MHz-bandwidth can be used for data transfer. Drain to Source resistance is 500mOhm. The analogue multiplexer has 2 outputs.

ADG839YKSZ-500RL7 Features

1 Channels
Switch Circuit: SPDT
Bandwidth: 25MHz
Drain-to-Source resistance: 500mOhm

ADG839YKSZ-500RL7 Applications

There are a lot of Analog Devices Inc.
ADG839YKSZ-500RL7 Analog Switches & Multiplexers ICs applications.

• Transmit
• Low-Voltage
• Isolation
• Medical
• Imaging
• Ultrasound
• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems