ADG849YKSZ-REEL7 Overview

Shipping overseas is convenient with the electronic component packed in 6-TSSOP, SC-88, SOT-363. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. In Surface Mount, this analog switch is mounted. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. Operation at a temperature around -40°C~125°C TA. 6 terminations have been made so far. Due to its 1 channels, the electrical component produces high-quality output. If the voltage supply is 5V volts, the electrical component should be turned on and run. Into the electrical component body are injected 6 pins. These analog multiplexers are built based on SPDT switching circuits. ADG849 can be used to search for analog multiplexer variants. An switch multiplexer with 600mOhm internal resistance has a value of 600mOhm. To find out what the 6 pins do, please refer to the datasheets. Multiplexer or Switches is a typical switch device. normally, users should not supply switches with voltages higher than 5.5V. The digital multiplexer has a low cost Single supply. 1.8V is the lowest voltage the electrical component should receive. For this digital switch to work, 1nA current would suffice. This analog switch requires a voltage of 1.8V~5.5V to drain from a single voltage supply. A digital multiplexer may suffer damage if voltage is applied above 1nA. The electronic component can function from 5.5V. There are various bandwidths available for data transfer. A analog switch ics with 2 outputs is included.

ADG849YKSZ-REEL7 Features

1 Channels
Switch Circuit: SPDT
1nA Supply Current
Bandwidth: 38MHz

ADG849YKSZ-REEL7 Applications

There are a lot of Analog Devices Inc. ADG849YKSZ-REEL7 Analog Switches & Multiplexers ICs applications.

• Residential Gateways, Home Gateway/Router
• Fault Tolerant Systems
• Audio/video switches
• Cell phones
• Automotive applications
• Digital Cross-Connects
• PBXs
• Video switching
• Precision test equipment
• Microwave transmission systems