ADM1170-1AUJZ-RL7 Overview
This is included in the SOT-23-8 Thin, TSOT-23-8 package.At present, 1 channels are available.It's packaged in a Tape & Reel (TR) shape.Total terminations are 8.Device position DUAL is its terminal position.In total, there are 8 pins on it.A supply voltage of 5V can result in high efficiency.According to Surface Mount, it has been set up.Electric components of this type are classified as Hot Swap Controller.For reliable operation, set the temperature to -40°C~85°C.Application General Purpose is available on the device.As you can see in Auto Retry, I2C, UVLO, it's featured.The device should be able to be powered by a 2.7V~16.5VV power source.There are numbers in the ADM1170 family that include it.8 pins are used in operation.There are Current Limit, Fault Timeout, Turn On Voltage features that can be programmed.Positioned in direction of Surface Mount, it is at a right angle.Hot-swappable device is important that the supply voltage (Vsup) is kept above 2.7V for normal operation of the device.There is a supply current of 650μA.Hot Swap requires 800μA volts of current to operate.By using this device, it is also possible to produce UNDERVOLTAGE LOCKOUT.
ADM1170-1AUJZ-RL7 Features
The terminal position of 8
Features of Auto Retry, I2C, UVLO
Programmable features of Current Limit, Fault Timeout, Turn On Voltage
ADM1170-1AUJZ-RL7 Applications
There are a lot of Analog Devices Inc.
ADM1170-1AUJZ-RL7 hot swap controllers applications.
- Avionics systems
-
- Safe board insertion and extraction
-
- Industrial computers and servers
-
- Redundant-array-of-independent-disk (RAID) storage
-
- Other forms of communications infrastructure
-
- Board or blade insertion into live backplanes
-
- Backplane
-
- Loads
-
- Distributed power systems
-
- Redundant negative voltage supplies
-