This LED driver IC features an enhanced 24-SSOP (0.209, 5.30mm Width) package for driving common LEDs.This receiver is mounted in the Tape & Reel (TR) package.As a Transceiver can transceiver, this part has enabled many applications to be served.PCB or development board with Surface Mount-type connectors can accommodate this wide receiver.This differential driver requires a 4.5V~5.5V power supply.This electronic part can have?up to 4/4 eligible receivers/drivers on the field at once.?Applications with operating temperatures of -40°C~85°C have been designed primarily for this ic receiver.With a voltage range of 5V, this driver IC can operate efficiently.This integrated circuit has 24 terminations designed for driving and receiving signals from data.As a standard package, this transceiver comes with a 24-pin layout that follows the market standard.Since the base part number ADM208 describes the product type, temperature, package, etc., you might get more options by searching with it.This is a 24-pin driver IC with enhanced power dissipation control.A dramatic reduction in package size is achieved through optical transceiver downsizing and high-density Surface Mount mounting technologies.In the case of this receiver, a resolution of 4 bits is typically specified.As mentioned above, the transceiver module is designed to operate from an input voltage supply of 5V.A Line Driver or Receivers subcategory can be assigned to this rf transceiver module.There is one driver IC that is designed to operate from a 5V power supply, and only one driver IC in total.It implements 1 transceivers in total.On the integrator circuit, there are 4 drivers embedded.Input voltage is set to a value of 13mA, and this integrating circuit is capable of driving LEDs with that voltage.Input currents exceeding 13mA may cause this can transceiver to malfunction.