ADP1870ARMZ-0.6-R7 Overview

Capsuled in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, the switching controller suits most application needs. The dc motor controller is adquate to generate for 1 outputs. The pmic is packaged in Tape & Reel (TR) solid enclosure. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sThe supply and operating voltage of the dc control are 2.95V~20V. Qualified to work in a -40°C~125°C TJ dc switcher. This switching controller can switch at 600kHz. Surface Mount makes it suitable for general dc dc regulator. The dcdc regulator features Enable for efficient switching control. The switch converters are connected to a SWITCHING CONTROLLER analog IC. Terminal (s) of the switching converters are designed at the DUAL position. 10 terminations with a variety of function. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. 12V nominal DC switcher's voltage input. Other relevant dc to dc converter ics can be found by searching "ADP1870". Switching converter has a total of 10 pins. Switching converter is a type of Switching Regulator or Controllers in particular. According to the test statistics, DC regulator outputs 600mV voltage. The dc dc regulator's usual output current is 25A, which should be noted down when you start a project. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 65 %. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sDC to DC voltage regulator has a value of MINIMUM OUTPUT VOLTAGE: 0.6V to better satisfy the need. It is suggested that users apply 20V to the voltage regulator dc to dc in order to run it safely and reliably in a circuit. Because the dc switcher's maximum input voltage is 20V users must limit the voltage accordingly. Switching controller is necessary to have a supply voltage of 2.95V. The switching converter can output 18V volts at its utmost, according to the datasheet. It runs on a supply current of 140μA. The voltage controller's lowest voltage output is not less than 600mV. nominal current supply for this the controllers dc is 1.1mA.

ADP1870ARMZ-0.6-R7 Features

Transistor Driver Outputs
Switching Frequency: 600kHz
Enable
PULSE WIDTH MODULATION
Max Duty Cycle: 65 %
MINIMUM OUTPUT VOLTAGE: 0.6V

ADP1870ARMZ-0.6-R7 Applications

There are a lot of Analog Devices Inc.
ADP1870ARMZ-0.6-R7 DC to DC converter applications.

• CNC system
• Servo drive system
• Digital display device
• Linear guide
• Ball screw pair
• Computer application technology
• Network technology
• Automation technology
• CMM
• Various precision measuring instruments