ADP1870ARMZ-1.0-R7 Overview

This switching controller fits most application requirements since it is packaged in a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package. There is sufficient capacity to generate switching controller for outputs 1. PMIC is packaged in a solid enclosure of Tape & Reel (TR). The system can process Transistor Driver dc switching's outputs (s). dc control's supply and operating voltages are 3.25V~20V. A -40°C~125°C TJ dc switcher is not a problem. The switching controller is capable of switching at the 1MHz position. dc dc regulators can be carried out with Surface Mount. To provide efficient switching control, Enable is included in the dcdc regulator. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. switching converters terminal (s) are designed to be at DUAL. A variety of terminations with 10 of dc switching. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 12V. ADP1870 can be used to locate other relevant dc to dc converter ics. There are only 10 pins on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. Based on the test statistics, DC regulator outputs voltage 600mV. If you are starting a new project, you should note the dc dc regulator's typical output current is 25A. It is set to 45 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. The Surface Mount makes DC switcher suitable for most applications and prototypes. This value is MINIMUM OUTPUT VOLTAGE: 0.6V so that DC to DC voltage regulator better serves the purpose. For safe and reliable operation in a circuit, voltage regulator dc to dc is suggested that users apply 20V. In order to limit the voltage of a dc switcher whose maximum input voltage is 20V, it must be limited by the user. Voltage 2.95V is needed for the supply. At its maximum, the switching converter can output 18V volts. The supply current of the voltage controller is 140μA. At its lowest voltage, the voltage controller does not produce less than 600mV. Switching voltage regulators' nominal current supply is 1.1mA.

ADP1870ARMZ-1.0-R7 Features

Transistor Driver Outputs
Switching Frequency: 1MHz
Enable
PULSE WIDTH MODULATION
Max Duty Cycle: 45 %
MINIMUM OUTPUT VOLTAGE: 0.6V

ADP1870ARMZ-1.0-R7 Applications

There are a lot of Analog Devices Inc. ADP1870ARMZ-1.0-R7 DC to DC converter applications.

• Power supplies of electronic gadgets
• Shearing machines
• Hydrogen power
• Drilling machines
• Sink circuits
• Arc suppression circuits
• Game consoles
• Scientific research
• Automation technology
• Servo drive system