CS3012-ISZR Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. Buffer amps of this type are called Instrumentation-types. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. The op amp ic has an array of 8 pins on it. Op amp rates 10μV as input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureIt is possible to operate this buffer amplifier from a supply current of 1.7mA . 300dB should be the voltage gain. A instrumentation amplifier like this has 2 circuits. There are a total of 2 channels available on the op amps. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. In order for this buffer op amp to function, it should have a temperature of at least -40°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 85°C. The operating supply voltage of the buffer op amp is rated at 3.35V. For optimal performance, this electrical part should be connected to a supply with a current of 1.7mA. It is important to keep in mind that the power supply voltage of this electric component is below 6.7V, which is suitable. As a rule of thumb, the supply voltage of the op amp should not be lower than 2.7V. Conduct linear amplifier under the dual suuply voltage of 3.35V.
CS3012-ISZR Features
300dB voltage gain
Output Type: Rail-to-Rail
CS3012-ISZR Applications
There are a lot of Cirrus Logic Inc. CS3012-ISZR Instrumentational OP Amps applications.
- Communication device
- Ultrasound transducers
- Displayers for aircraft and air transportation control systems
- Exponential operation circuits
- Hand-held batteries
- Digital cameras
- High/low-pass filter circuit
- E-book readers
- Weighing systems
- Proportional operation circuits
