S29VS256RABBHI010

join

new-10%

Manufacturer part number:S29VS256RABBHI010

Manufacturer:Cypress Semiconductor

Description:Surface Mount Memory IC 256 Mb kb 7.7mm mm 60mA mA 16b b

Case Package:SOT-23

Datasheet:S29VS256RABBHI010 Datasheet

RoHs Status:non-compliant

Name	Value
Type	Parameter
Mount	Surface Mount
Package / Case	FBGA
Number of Pins	44
JESD-609 Code	e3
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	44
ECCN Code	3A991.B.1.A
Terminal Finish	Matte Tin (Sn)
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Additional Feature	BOTTOM BOOT BLOCK
HTS Code	8542.32.00.51
Technology	CMOS
Terminal Position	BOTTOM
Terminal Form	BALL
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	1.8V
Terminal Pitch	0.5mm
Frequency	108MHz
Time@Peak Reflow Temperature-Max (s)	40
Operating Supply Voltage	1.8V
Temperature Grade	INDUSTRIAL
Interface	Parallel, Serial
Max Supply Voltage	1.95V
Min Supply Voltage	1.7V
Memory Size	32MB
Nominal Supply Current	60mA
Memory Type	FLASH, NOR
Frequency (Max)	108MHz
Access Time	80 ns
Data Bus Width	16b
Organization	32MX8
Memory Width	8
Address Bus Width	24b
Density	256 Mb
Sync/Async	Asynchronous
Word Size	16b
Length	7.7mm
Height Seated (Max)	1mm
Radiation Hardening	No
RoHS Status	RoHS Compliant

Quantity	Unit Price	Ext. Price
377	$6.40989	$2416.52853

S29VS256RABBHI010 Overview

As far as its memory type goes, it falls into the FLASH, NOR category. FBGA case encloses it. There is 32MB of memory on the chip. There are 44 terminations on the chip. There are 1 functions supported by this part as part of the comprehensive working process. The memory device is designed to be supplied with an 1.8V volt power supply in order to operate properly. In this ic memory chip, there is an 44-pin package that encloses the device. This memory chip has an operating supply voltage of 1.8V. As a result of the Surface Mount mounting configuration, this chip is designed to be straightforward, high-efficiency, and easy to install. As far as the nominal supply current of this memory component is concerned, it is rated at 60mA. Despite all its benefits, this memory chip also offers BOTTOM BOOT BLOCK for improved system performance. Memory ics must operate at a temperature of at least -40°C. Temperatures over 85°C°C are not recommended. If this part is to be used, the minimum supply voltage should not be less than 1.7V volts. The operating voltage of the memory ics shall not exceed 1.95V. There is an 108MHz frequency with which this memory chip processes data. In this Memory chip, the maximum frequency is 108MHz.