The Tube method is used for packaging clock ICs. Clock PLL is embedded in the 8-SOIC (0.154, 3.90mm Width) package. This clock generator will sustain a maximum temperature of 260 when reflown. As a result, frequency synthesizers can be found to contain 8 terminations. To operate this time clock generator, 3.3V voltage should be applied. It is designed that the Clock PLL's input should be Clock. For full access to the electronic component's capabilities, 1 circuits are implemented. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. The maximal supply voltage this clock generator would take is 3.6V. In order to maintain safety, this frequency generator should be supplied with voltages above 3V. Clock PLL works with 3V~3.6V supply voltage provided. Test statistics estimate a temperature of 0°C~70°C, which should be set as the ambient temperature. As far as electrical parts go, this component can be classified as a Fanout Buffer (Distribution), Zero Delay Buffer component. It is a 8-bit clock PLL designed specifically for microprocessors. This part number is related to its related electronic parts. It is possible to connect to the PLL via 8 pins. Supply voltage 3.3V is what clock generator can handle. The output frequency can be magnified as high as possible with the assistance of 4 signal outputs. The timing skew of this frequency synthesizer is low at 0.5 nsmax. At frequencies of 133.3MHz, RF synthesizer achieves high efficiency. This frequency synthesizer operates at a maximum current of 45mA.
CY2304SXC-1 Features
Available in the 8-SOIC (0.154, 3.90mm Width) Supply voltage of 3.3V Operating supply voltage of 3.3V
CY2304SXC-1 Applications
There are a lot of Cypress Semiconductor Corp CY2304SXC-1 Clock Generators applications.