CY2305SXI-1H Overview

Tube-method packaging is used for clock ICs. In the 8-SOIC (0.154, 3.90mm Width) package, there is an embedded clock generator. This clock generator ic can sustain 260 degrees of temperature during reflowing. 8 terminations can be found in frequency generators. This clock generator ic should receive a voltage of 3.3V. As the Clock PLL's input, Clock is designed to be used in order to generate the clock signal. For full access to the electronic component's capabilities, 1 circuits are implemented. With the Surface Mount, it is easy to install this electric component on the panel. It would take a maximum supply voltage of 3.6V to operate this time clock generator. Keeping the supply voltage for this frequency synthesizer above 3V is recommended for safety reasons. There should be 3V~3.6V provided with this RF synthesizer. Test statistics estimate a temperature of -40°C~85°C, which should be set as the ambient temperature. This electronic component is usually classified as a Fanout Buffer (Distribution), Zero Delay Buffer component. It is a 8-bit clock PLL designed specifically for microprocessors. According to the base part number CY2305, its related parts can be found. There is an available 8 pin on the PLL. There is a maximum supply voltage of 3.3V that electronic frequency generator can handle. 5 signal outputs enable clock PLL to magnify output frequency as high as possible. At frequencies of 133.33MHz, RF synthesizer achieves high efficiency.

CY2305SXI-1H Features

Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V

CY2305SXI-1H Applications

There are a lot of Cypress Semiconductor Corp CY2305SXI-1H Clock Generators applications.

• Infotainment systems
• High-speed communication applications
• High-frequency induction heating
• Remote telemetry and instrumentation
• Multi-function printers
• Symbol synchronization
• Wi-Fi routers
• Clock synchronization
• Electronic equipment
• Local oscillator source in receiver