Clock ICs are packaged using the Tube method. In the 16-SOIC (0.154, 3.90mm Width) package, there is an embedded clock generator. A maximum temperature of 260 can be sustained by this clock generator ic during reflowing. There are a total of 16 terminations in this file. A voltage of 3.3V should be applied to this electronic frequency generator. In this case, LVCMOS, LVTTL is designed to be the input of the clock generator. To access the electronic component's full performance, 1 circuits are implemented. The frequency generator has a maximum frequency of 133.33MHz. Thanks to the Surface Mount, this electric component can easily be installed on a panel. There is a maximum voltage of 3.6V for this clock generator. Keeping the supply voltage for this frequency synthesizer above 3V is recommended for safety reasons. There are 3V~3.6V available for use with this clock PLL. Test statistics suggest setting the ambient temperature at 0°C~70°C, which is 0°C~70°C. There are several logic levels in LVCMOS logic that can be used with this clock generator. It is possible to classify this electronic component as a Fanout Buffer (Distribution), Zero Delay Buffer. An IC that generates clocks specifically for microprocessors, this clock PLL is 16-bits in si16e. The related electrical components for the base part number CY2309 can be found below. A 16 pin is available on the PLL. Time clock generator is capable of handling a voltage of 3.3V. A Clock Drivers clock generator is essentially what this device is. The output frequency is magnified as high as possible with 9 signal outputs. The timing skew of this frequency synthesizer is low at 0.2 nsmax.
CY2309CSXC-1H Features
Available in the 16-SOIC (0.154, 3.90mm Width) Supply voltage of 3.3V Operating supply voltage of 3.3V
CY2309CSXC-1H Applications
There are a lot of Cypress Semiconductor Corp CY2309CSXC-1H Clock Generators applications.