It is packaged using the Tape & Reel (TR) method since it is a clock IC. The 16-SOIC (0.154, 3.90mm Width) package embeds this Clock PLL. This clock generator will sustain a maximum temperature of 260 when reflown. 16 terminations can be found in frequency generators. For this clock generator ic, a voltage of 3.3V is required. This clock generator receives its inputs from LVCMOS, LVTTL, which is designed to be the clock source. For a full understanding of the electronic part's performance, 1 circuits are implemented. RF synthesizers based on this clock provide frequencies up to 133.33MHz maximum. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. The maximal supply voltage this clock generator would take is 3.6V. It is safe to use this frequency synthesizer with a supply voltage above 3V. This clock PLL works with a supply voltage of 3V~3.6V. Using the test statistics, we estimate that the ambient temperature should be -40°C~85°C. The RF synthesizer is compatible with LVCMOS logic levels. This electronic component can be classified into Fanout Buffer (Distribution), Zero Delay Buffer. An IC that generates clocks specifically for microprocessors, this clock PLL is 16-bits in si16e. According to the base part number, its related parts can be founded. There is a 16 pin that is available on the frequency synthesizers. Clock PLL is capable of handling a voltage of 3.3V. Clock generator can also be included into Clock Drivers. 9 signal outputs enable clock PLL to magnify output frequency as high as possible. Low timing skew is provided by this analog clock generator at maximum 0.2 ns.
CY2309CSXI-1HT Features
Available in the 16-SOIC (0.154, 3.90mm Width) Supply voltage of 3.3V Operating supply voltage of 3.3V
CY2309CSXI-1HT Applications
There are a lot of Cypress Semiconductor Corp CY2309CSXI-1HT Clock Generators applications.