As a clock IC, it uses the Tube package. Embedded in the 16-SOIC (0.154, 3.90mm Width) package is this Clock PLL. In the reflowing process, this clock generator ic is able to maintain a maximum temperature of 260. There are 16 terminations found in this file. For this clock generator ic, a voltage of 3.3V is required. It is designed that the Clock PLL's input should be LVCMOS, LVTTL. A total of 1 circuits are implemented to access the full performance of the electrical part. Providing a maximum frequency of 133.33MHz, this clock-based RF synthesizer is suitable for a variety of applications. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. Approximately 3.6V is the maximum supply voltage needed by this time clock generator. The supply voltage for this frequency synthesizer should be kept above 3V for safety considerations. There should be 3V~3.6V provided with this RF synthesizer. As determined by the test statistics, the ambient temperature should be set to 0°C~70°C. LVCMOS logic levels are supported by this RF synthesizer. This is an electronic part that can be classified as a Fanout Buffer (Distribution), Zero Delay Buffer in this case. In particular, this clock PLL is designed to be used with microprocessors. The related electrical components for the base part number CY23S09 can be found below. Clock generator is designed with 16 pins. In terms of the supply voltage, PLL clock can handle 3.3V volts. This clock generator can be classified as a kind of Clock Drivers in general. The output frequency can be magnified as high as possible with the assistance of 9 signal outputs. Low timing skew is offered by this RF synthesizer at maximum 0.25 ns. A search for the 23S family will yield similar electronic components.
CY23S09SXC-1 Features
Available in the 16-SOIC (0.154, 3.90mm Width) Supply voltage of 3.3V Operating supply voltage of 3.3V
CY23S09SXC-1 Applications
There are a lot of Cypress Semiconductor Corp CY23S09SXC-1 Clock Generators applications.