Surface Mount Memory IC CY7C136 16 kb kb 170mA mA 8b b
SOT-23
CY7C136-25NXCT Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
52-QFP
Number of Pins
52
Supplier Device Package
52-PQFP (10x10)
Operating Temperature
0°C~70°C TA
Packaging
Tape & Reel (TR)
Published
2003
Part Status
Obsolete
Moisture Sensitivity Level (MSL)
3 (168 Hours)
Max Operating Temperature
70°C
Min Operating Temperature
0°C
Technology
SRAM - Dual Port, Asynchronous
Voltage - Supply
4.5V~5.5V
Frequency
25GHz
Base Part Number
CY7C136
Operating Supply Voltage
5V
Interface
Parallel
Max Supply Voltage
5.5V
Min Supply Voltage
4.5V
Memory Size
16Kb 2K x 8
Number of Ports
2
Nominal Supply Current
170mA
Memory Type
Volatile
Access Time
25ns
Memory Format
SRAM
Memory Interface
Parallel
Write Cycle Time - Word, Page
25ns
Address Bus Width
22b
Density
16 kb
Sync/Async
Asynchronous
Word Size
8b
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
CY7C136-25NXCT Product Details
CY7C136-25NXCT Overview
As far as its memory type goes, it falls into the Volatile category. The case comes in Tape & Reel (TR) size. As you can see, it is embedded in 52-QFP case. There is an 16Kb 2K x 8 memory capacity on the chip. This device utilizes a SRAM format memory which is of mainstream design. With an extended designed operating temperature of 0°C~70°C TA, this device is capable of lots of demanding applications. The device is capable of handling a supply voltage of 4.5V~5.5V. It is recommended to mount it in the Surface Mount mounting type. CY7C136, as the device's base part number, is frequently referred in order to select similar parts. It is encased in an 52-pin package that contains this ic memory chip. According to the datasheet, this memory chip operates at an operating voltage of 5V. It uses Surface Mount mounting, which is an efficient, straightforward mounting method. It is rated 170mA for its nominal supply current when it comes to the memory component. Several ports on this chip are used to access one memory address for reading and writing. This device must operate at a minimum temperature of 0°C. Ideally, this memory ics should be operated at a temperature of no more than 70°C°C. It is recommended that the minimum supply voltage for this part be no less than 4.5V. The operating voltage shall not exceed 5.5V. There is a frequency of 25GHz for the data to be processed on this memory chip.