The Tape & Reel (TR) method is used for packaging clock ICs. There is a clock generator embedded in the 8-SOIC (0.154, 3.90mm Width) package. It contains 8 terminations that can be found in frequency synthesizer. Basically, a voltage of 3.3V should be applied to this electronic frequency generator. As the Clock PLL's input, Crystal is designed to be used in order to generate the clock signal. A total of 1 circuits are implemented to access the full performance of the electrical part. An upper frequency limit of 33.4MHz Max can be achieved with this clock-based frequency synthesizer. The Surface Mount allows this electrical component to be easily installed on the panel. As far as the supply voltage is concerned, clock PLL can be used with 3V~3.6V. By calculating the test statistics, -40°C~85°C is the appropriate ambient temperature. I would like to present to you a frequency synthesizer that is compatible with CMOS logic levels. Fanout Buffer (Distribution), Spread Spectrum Clock Generator is the type of electrical part that this component is classified as. There is a maximum supply voltage of 3.3V that frequency generators can handle. The clock PLL is generally classified as a Clock Generators device. The thermal destruction of an element may be caused by a supply current exceeding 7mA.
MB88151APNF-G-100-JNEFE1 Features
Available in the 8-SOIC (0.154, 3.90mm Width) Supply voltage of 3.3V Operating supply voltage of 3.3V
MB88151APNF-G-100-JNEFE1 Applications
There are a lot of Cypress Semiconductor Corp MB88151APNF-G-100-JNEFE1 Clock Generators applications.