W48C111-16H Overview

As a clock IC, it is packaged by the Tube method. The 28-SSOP (0.209, 5.30mm Width) package embeds this Clock PLL. The frequency generator is capable of withstanding a maximum temperature of 220 during reflowing. As you can see, it consists of 28 terminations. Basically, this time clock generator needs a voltage of 2.5V. There is a Clock PLL called Clock, Crystal which is designed to be the input to this clock generator. Using 1 circuits, the electronic part's full performance can be accessed. RF synthesizers based on this clock provide frequencies up to 100MHz maximum. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. There should be 2.375V~3.465V provided with this RF synthesizer. As determined by the test statistics, the ambient temperature should be set to 0°C~70°C. In this case, we are dealing with a frequency synthesizer that can be used with Clock logic levels. As far as this electronic part is concerned, it can be classified as a Fanout Buffer (Distribution), Spread Spectrum Clock Generator component. REQUIRES ADDITIONAL 3.3V SUPPLY is included in this frequency generator to enhance clock signal output. The output frequency can be magnified as high as possible with the assistance of 10 signal outputs. The thermal destruction of an element may result from an excess of supply current (higher than 80mA).

W48C111-16H Features

Available in the 28-SSOP (0.209, 5.30mm Width)
Supply voltage of 2.5V

W48C111-16H Applications

There are a lot of Cypress Semiconductor Corp
W48C111-16H Clock Generators applications.

• Picocells, femtocells and small cells
• Sampling clocks for ADC and DAC
• 1 Gigabit Ethernet
• 10 Gigabit Ethernet
• FPGA and processor clocks
• Line cards used in telephone exchange
• Fiber Channel
• PCI express cards
• Infotainment systems
• Medical equipment