20-101-1055 Overview

The microcontroller has been classified as a MPU Core type module or board.An integral MCU electronics of it is a processor with Rabbit 3000 cores that drives the whole thing.It is important to note that the microcontroller is set to 0°C~70°C as the default setting.A MCU electronics's flash size is measured by the letter 512KB Internal 32MB External.Connectors of type 2 IDC Headers 2x17, 1 IDC Header 2x5. 1 xD-Picture Card are the most common.A member of the RabbitCore® Series, this MCUs can be found in this category.A RAM size of 1MB is set in order to ensure that the software runs normally and that MCU chip does not crash.There is a 44.2MHz speed for this MCU chip.In order for microprocessor to continue to function accurately, microprocessor must continue to operate exactly at 44.2MHz frequency as long as microprocessor remains accurate.In addmicroprocessorion to that, microprocessor is packaged wmicroprocessorh Module.At the time of this microprocessor, the maximum operating temperature is 70°C.As far as the temperature is concerned, microprocessor should be warmer than 0°C when microprocessor is operating.

20-101-1055 Features

Core processor of Rabbit 3000
Flash size of 512KB Internal 32MB External
Speed of 44.2MHz

20-101-1055 Applications

There are a lot of Digi
20-101-1055 Microcontroller, Microprocessor, FPGA Modules applications.

• Process Monitoring
• Healthcare Monitoring
• Patient Monitoring
• IoT Secure Gateways
• Human Machine Interface
• Human Machine Control Panel
• Home and Building Automation
• Thermostat
• Industrial Gateways
• Embedded Instrumentation