In order to save board space, the SOT-23-6 package is used. In LED drivers, the outputs are all set to 1.Surface Mount is used for mounting the led light driver.When it emerges as a DC DC Regulator, it shows high-performance and reliability.The LED driver has the capability of operating at a temperature of -40°C~85°C TA.The benefits of Backlight are considerable.The frequency of 1MHz determines how it operates.There are 6 pins on the base of this LED driver.It is possible for undetermined failures to occur if the voltage supply is lower than 2.7V.The mount is in the way of Surface Mount.The voltage of 9V is acceptable.An optimal value of supply voltage is 9V.At its minimal input voltage, it operates at 2.7V.A minimum supply voltage of 2.7V is required to meet the highest efficiency standards.It reaches 9V when the maximum supply current is allowed.For stable operation, the operating temperature should not exceed 85°C.As a condition for achieving stable operation, the operating temperature should be greater than -40°C.Electronic components can function properly when their switching frequency is set to 1MHz.It has a voltage of 27V.It is important to keep the output voltage below 38V.A total of 1 channels are available for transmission.
AP3032KTR-G1 Features
Available in the SOT-23-6 package Operating temperature of -40°C~85°C TA Frequency of 1MHz Switching frequency of 1MHz Output voltage of 27V
AP3032KTR-G1 Applications
There are a lot of Diodes Incorporated AP3032KTR-G1 LED Driver ICs applications.
Gallery lighting
Portable lighting
Street lighting
General lighting
Down lights
Amusement Machines
Ultraviolet (UV) and Infrared (IR) Irradiation Devices