PI49FCT3802LE Overview

The clock divider is available in 16-TSSOP (0.173, 4.40mm Width) case. This package is packaged in the form of a Tube. It is recommended that the maximum value for normal operation is 156MHz. A total of 16 terminations can be found in it. Using a supply voltage of 3.3V allows for high efficiency. As far as I can tell, it is mounted by Surface Mount. Electrical components classified as Fanout Buffer (Distribution) are classified as such. If you wish to ensure reliable performance, you should set the temperature to 0°C~70°C. The clock switch should be able to be powered by a 3V~3.6V V source. In the direction of Surface Mount, it is placed. Its output is CMOS, TTL. During operation, 16 pins are used. The structure belongs to the 49FCT3802 family of structures. There is a circuit clock contained within Clock Drivers that is responsible for this function. This electronic gadget is a member of the FCT family. In this case, Vsup will be set to 3.6V (decimal). To ensure normal operation of the cut smart buffer, the supply voltage (Vsup) should always be kept above 3V. By default, output 5 is set. In this case, the electronic part belongs to the 49FCT series. When the supply voltage is at 3.3V, the efficiency will be highest. There is no external influence on it, as it consumes 100nA quiescent current.

PI49FCT3802LE Features

16 terminations
The operating temperature of 0°C~70°C degrees
Clock Drivers subcategory

PI49FCT3802LE Applications

There are a lot of Diodes Incorporated PI49FCT3802LE Clock Buffers & Drivers applications.

• Cell Phone (UMTS/WCDMA/GSM)
• Clock signal level shifting
• Data center
• Industrial automation control system
• High-performance server
• Navigation equipment
• DDR4 JEDEC standard LRDIMM design
• Medical imaging
• Other clock/data distribution
• Information equipment