ZXCT1110W5-7 Overview

Buck boost converter is part of the package Cut Tape (CT).In the same manner as SC-74A, SOT-753, voltage regulator is packaged.Surface Mount is used to mount this current regulator on the board.Current regulator is recommended that the operating temperature not exceed -40°C~125°C.An input voltage wcurrent regulatorh a value of 2.5V~36V may be used as an input voltage.There are two types of ZXCT1110s in this family.In computers and other communications constant current regulators, 5 pins are pronged contacts that form part of a signal interface.It is mounted by Surface Mount on this current regulator.Providing the constant current is powered by a 20VV power source, the constant current should be able to function.POWER SUPPLY SUPPORT CIRCUIT is the analog IC that this power converter employs.Compared to the last few years, the number of channels has grown strong/weak: 1.The maximum supply voltage of 36V is supported by it.Power Management Circuits, which is a part that contains all of these current regulations, is included in this part.With the minimum supply voltage of 2.5V, it is able to operate.The operating supply current supplied for its operation reaches 19nA.A 20V power supply is used to power the boost converter.For high efficiency, the supply voltage should be maintained at 9V.

ZXCT1110W5-7 Features

Cut Tape (CT) package
ZXCT1110 family
The maximal supply voltage of 36V
20V power supplies

ZXCT1110W5-7 Applications

There are a lot of Diodes Incorporated ZXCT1110W5-7 Current Regulation/Managements applications.

• Motor controls
• Power supply current measurement
• Over current monitor
• Over current monitor
• Over-current protection
• DC-to-dc converters
• Over-current measurement
• Industrial applications current measurement
• Vehicle dynamic controls
• Battery management