XR81111-CA04-F Overview

Clock ICs are packaged using the Cut Tape method. In the QFN package, there is an embedded clock generator. There are a total of 10 terminations in this file. A voltage of 3.3V should be applied to this electronic frequency generator. In this case, Crystal is designed to be the input of the clock generator. To access the electronic component's full performance, 1 circuits are implemented. The frequency generator has a maximum frequency of 156.25MHz. There are CLOCK GENERATOR, OTHER uPs/uCs/Peripheral ICs integrated into this digital clock generator. A 10 pin is available on the clock PLL. In addition to having an impressive low-temperature performance, this clock device can perform -40°C operations simultaneously. This RF synthesizer can last with attenuated performance at 85°C. In order to supply this clock PLL, a voltage greater than 3.465V is not acceptable. This RF synthesizer can operate at a voltage as low as 3.135V. By operating at a frequency of 156.25MHz, frequency generator is able to achieve high efficiency. During this clock generator operation, a maximum current of 68mA is supplied.

XR81111-CA04-F Features

Available in the QFN
Supply voltage of 3.3V

XR81111-CA04-F Applications

There are a lot of Exar Corporation
XR81111-CA04-F Clock Generators applications.

• Wide area power system
• Digital circuits
• Wireless base station for LTE, LTE-advanced
• Picocells, femtocells and small cells
• Sampling clocks for ADC and DAC
• 1 Gigabit Ethernet
• 10 Gigabit Ethernet
• FPGA and processor clocks
• Line cards used in telephone exchange
• Fiber Channel