NBPLLNN015PGUNV Overview

As a convenience, this transducer is included in 6-SMD, No Lead, Top Port. Temperature should be set at -40°C~125°C on transducers in order for them to work reliably. Obtaining a 1.8V~12V supply voltage is not a problem for the transducers. It is possible for the transducers to operate at a maximum temperature of 125°C. Temperatures below -40°C are unacceptable for the transducers. To ensure proper operation of the transducers, it is necessary to connect the 6 pins. A nominal supply current of 1.5mA can run the transducers normally. If the transducer is designed to operate continuously at the rated ambient temperature, then the DC voltage should be 12V. You can apply a voltage of 12V without damaging the transducers. Minimum supply voltage 1.8V is required for the transducers to operate.

NBPLLNN015PGUNV Features

Moisture Sensitivity Level: 1 (Unlimited)
Package / Case: 6-SMD, No Lead, Top Port
Operating Temperature: -40°C~125°C
6 Pins
NBP series
Operating Pressure: 15PSI (103.42kPa)

NBPLLNN015PGUNV Applications

There are a lot of Honeywell Sensing and Productivity Solutions
NBPLLNN015PGUNV Transducers applications.

• Hydrogen Storage
• Refrigerant pressure monitoring in HVAC/R systems
• Dry air system pressure, process controls and automation
• Dry air system monitoring
• Hydraulic, brake, and engine oil fluid pressure monitoring
• Air brake pressure monitoring
• Vertical velocity indication (e.g. rise/sink speed)
• Internet of things
• Enhancement of GPS navigation
• Indoor navigation & localization (floor detection, elevator detection)