BTS7740GNUMA1 Overview

In order to package H bridge, Tape & Reel (TR) is used.H bridge is included in the 28-SOIC (0.295, 7.50mm Width) package as a cost-saving measure.Based on the supply voltage of 1.8V~42V, improved reliabilbridge drivery can be ensured.H bridge circuit is put into place in the way of Surface Mount.Motor driver H bridge is possible for -40°C~150°C TJ to operate normally at motor driver H bridges operating temperature.There are lots of uses for H bridge motor driver, including DC Motors, General Purpose.On the PCB H gate is mounted using Surface Mount.Full bridge also has a number of specific characteristics, including Status Flag.To terminate a transmission line with the H bridge whose characteristic impedance matches the line, 28 terminations are employed.Signal interfaces include 28 pins that serve as pronged contacts.The base H bridge ic number of BTS7740 allows you to find more related H bridge ics by using that number.To operate H bridge circuit, a voltage supply of 12V is required.H bridge circuit contains an analog IC type BRUSH DC MOTOR CONTROLLER.The H-bridge is an electronic H-bridge of the TrilithIC™ series.During a specified ambient temperature, the power supply can supply the maximum load current 8A.It is through the 28 pins that the bridge driver can perform its specific functions.

BTS7740GNUMA1 Features

Available in 28-SOIC (0.295, 7.50mm Width) Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : BTS7740

BTS7740GNUMA1 Applications

There are a lot of Infineon Technologies
BTS7740GNUMA1 Full Bridge Drivers, Half-Bridge Drivers applications.

• Desktop Computers
• V-Core
• Non-V-Core
• Workstations
• High-Current DC-DC Point-of-Load Converters
• Networking Microprocessor Voltage Regulators
• Telecom Microprocessor
• Voltage Regulators
• Small Form-Factor Voltage Regulator Modules
• Notebook Computers