5V V Surface Mount 68 Pin Memory IC 36 kb kb 24mm mm 300mA mA 9b b
SOT-23
70914S15J8 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
7 Weeks
Mount
Surface Mount
Package / Case
PLCC
Number of Pins
68
Packaging
Tape & Reel
Published
2010
JESD-609 Code
e0
Pbfree Code
no
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
68
ECCN Code
EAR99
Terminal Finish
Tin/Lead (Sn85Pb15)
Max Operating Temperature
70°C
Min Operating Temperature
0°C
Additional Feature
AUTOMATIC POWER-DOWN; LOW POWER STANDBY MODE; SELF TIMED WRITE
Terminal Position
QUAD
Terminal Form
J BEND
Peak Reflow Temperature (Cel)
225
Number of Functions
1
Supply Voltage
5V
Frequency
50MHz
Pin Count
68
Operating Supply Voltage
5V
Power Supplies
5V
Temperature Grade
COMMERCIAL
Interface
Parallel
Max Supply Voltage
5.5V
Min Supply Voltage
4.5V
Number of Ports
2
Nominal Supply Current
300mA
Memory Type
RAM, SRAM
Access Time
15 ns
Organization
4KX9
Output Characteristics
3-STATE
Address Bus Width
12b
Density
36 kb
Standby Current-Max
0.015A
I/O Type
COMMON
Sync/Async
Synchronous
Word Size
9b
Length
24mm
Height Seated (Max)
4.57mm
Width
24mm
Thickness
3.63mm
Radiation Hardening
No
RoHS Status
RoHS Compliant
Lead Free
Contains Lead
70914S15J8 Product Details
70914S15J8 Overview
In this case, the memory type of the device can be classified as RAM, SRAM. Case Tape & Reel is available. An embedded PLCC case surrounds memory ics. It is planted on the chip with 68 terminations. It supports up to 1 functions for comprehensive operation. There is a requirement for 5V to be supplied to this ic memory chip in order to operate. The ic memory chip comes in a package with 68 pins that allows it to be connected to a computer. The memory device has a total of 68 pins, thus indicating that it has a total of 68 memory locations. It is noted that the operating supply voltage of this memory is 5V. This chip uses Surface Mount mounting, a straightforward, high-efficiency method of mounting. It is rated 300mA for its nominal supply current when it comes to the memory component. This chip is not only loaded with advantages, but it also comes with AUTOMATIC POWER-DOWN; LOW POWER STANDBY MODE; SELF TIMED WRITE, which boosts the performance of your system. Several ports on this chip are used to access one memory address for reading and writing. In terms of power requirements, this memory chip uses only 5V . I/O port addresses in this device are mapped to COMMON bits from the device's memory. In order for this device to function properly, its operating temperature must not be less than 0°C. The temperature should not exceed 70°C degrees Celsius. This memory ics should not be operated with a voltage below 4.5V volts at the minimum. There shall be a voltage limit of 5.5V for its operation. Using this memory chip, you will be able to process data at a speed of 50MHz times per second.
70914S15J8 Features
Package / Case: PLCC 68 Pins Operating Supply Voltage:5V Additional Feature:AUTOMATIC POWER-DOWN; LOW POWER STANDBY MODE; SELF TIMED WRITE I/O Type: COMMON Freguency at 50MHz 50MHz terminals
70914S15J8 Applications
There are a lot of Integrated Device Technology (IDT) 70914S15J8 Memory applications.