Surface Mount 128 Pin Memory IC 576 kb kb 20mm mm 310mA mA 18b b
SOT-23
70V3379S6PRF8 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
7 Weeks
Mount
Surface Mount
Package / Case
TQFP
Number of Pins
128
Packaging
Tape & Reel
Published
2009
JESD-609 Code
e0
Pbfree Code
no
Part Status
Active
Moisture Sensitivity Level (MSL)
3 (168 Hours)
Number of Terminations
128
Terminal Finish
Tin/Lead (Sn85Pb15)
Max Operating Temperature
70°C
Min Operating Temperature
0°C
Additional Feature
PIPELINED OUTPUT MODE; SELF TIMED WRITE CYCLE
Subcategory
SRAMs
Technology
CMOS
Terminal Position
QUAD
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
225
Number of Functions
1
Supply Voltage
3.3V
Terminal Pitch
0.5mm
Frequency
83.3MHz
Pin Count
128
Operating Supply Voltage
3.3V
Temperature Grade
COMMERCIAL
Interface
Parallel
Max Supply Voltage
3.45V
Min Supply Voltage
3.15V
Number of Ports
2
Nominal Supply Current
310mA
Memory Type
RAM, SRAM
Access Time
6 ns
Output Characteristics
3-STATE
Address Bus Width
15b
Density
576 kb
Standby Current-Max
0.015A
I/O Type
COMMON
Sync/Async
Synchronous
Word Size
18b
Length
20mm
Height Seated (Max)
1.6mm
Width
14mm
Thickness
1.4mm
Radiation Hardening
No
RoHS Status
RoHS Compliant
Lead Free
Contains Lead
70V3379S6PRF8 Product Details
70V3379S6PRF8 Overview
In this case, the memory type of the device can be classified as RAM, SRAM. Case Tape & Reel is available. An embedded TQFP case surrounds memory ics. It is planted on the chip with 128 terminations. It supports up to 1 functions for comprehensive operation. There is a requirement for 3.3V to be supplied to this ic memory chip in order to operate. The ic memory chip comes in a package with 128 pins that allows it to be connected to a computer. The memory device has a total of 128 pins, thus indicating that it has a total of 128 memory locations. It is noted that the operating supply voltage of this memory is 3.3V. This chip uses Surface Mount mounting, a straightforward, high-efficiency method of mounting. It is rated 310mA for its nominal supply current when it comes to the memory component. This chip is not only loaded with advantages, but it also comes with PIPELINED OUTPUT MODE; SELF TIMED WRITE CYCLE, which boosts the performance of your system. Several ports on this chip are used to access one memory address for reading and writing. I/O port addresses in this device are mapped to COMMON bits from the device's memory. In order for this device to function properly, its operating temperature must not be less than 0°C. The temperature should not exceed 70°C degrees Celsius. SRAMs components are usually considered types of this component. This memory ics should not be operated with a voltage below 3.15V volts at the minimum. There shall be a voltage limit of 3.45V for its operation. Using this memory chip, you will be able to process data at a speed of 83.3MHz times per second.