Surface Mount 128 Pin Memory IC 2.3 Mb kb 20mm mm 480mA mA 18b b
SOT-23
70V3399S133PRFI8 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
16 Weeks
Mount
Surface Mount
Package / Case
TQFP
Number of Pins
128
Packaging
Tape & Reel
Published
2009
JESD-609 Code
e0
Pbfree Code
no
Part Status
Active
Moisture Sensitivity Level (MSL)
3 (168 Hours)
Number of Terminations
128
Terminal Finish
Tin/Lead (Sn85Pb15)
Max Operating Temperature
85°C
Min Operating Temperature
-40°C
Additional Feature
PIPELINED OR FLOW-THROUGH ARCHITECTURE
Subcategory
SRAMs
Technology
CMOS
Terminal Position
QUAD
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
225
Number of Functions
1
Supply Voltage
3.3V
Terminal Pitch
0.5mm
Frequency
133MHz
Pin Count
128
Operating Supply Voltage
3.3V
Temperature Grade
INDUSTRIAL
Interface
Parallel
Max Supply Voltage
3.45V
Min Supply Voltage
3.15V
Number of Ports
2
Nominal Supply Current
480mA
Memory Type
RAM, SRAM
Access Time
15 ns
Output Characteristics
3-STATE
Address Bus Width
17b
Density
2.3 Mb
Standby Current-Max
0.04A
I/O Type
COMMON
Sync/Async
Synchronous
Word Size
18b
Length
20mm
Height Seated (Max)
1.6mm
Width
14mm
Thickness
1.4mm
Radiation Hardening
No
RoHS Status
RoHS Compliant
Lead Free
Contains Lead
70V3399S133PRFI8 Product Details
70V3399S133PRFI8 Overview
A RAM, SRAM-type memory can be classified as the memory type of this device. In addition, memory ics is available in a Tape & Reel case as well. Embedded in the TQFP case, memory ics is a single file. A total of 128 terminations have been planted on the chip. The comprehensive working procedure of this part involves 1 functions. In order to power this memory device, 3.3V will be necessary. A 128-pin package containing this memory device is used to house this device. The memory device in question has 128 pins, thus indicating that it has 128 memory locations that can be accessed. There is a note indicating that this memory chip operates at an 3.3V volt supply voltage. The memory chip utilizes a straightforward, high-efficiency mounting method, Surface Mount mounting. There is a nominal supply current rating of 480mA for this memory component. This chip features all the merits of a conventional chip, but it also features PIPELINED OR FLOW-THROUGH ARCHITECTURE to improve system performance. 2 ports allow read/write access to one memory address in this chip. As part of the design, the I/O port addresses are mapped into the memory using an COMMON-bit number. There must not be a minimum operating temperature of less than -40°C for this device. A temperature of no more than 85°C centigrade is recommended for the component to be operated, otherwise, damage might be inflicted on the component. Usually, this memory ics falls under the SRAMs component category. Ideally, this part should be supplied with a voltage of at least 3.15V. An operating voltage of no more than 3.45V is required. A frequency of 133MHz is used to process the data on this memory chip.
70V3399S133PRFI8 Features
Package / Case: TQFP 128 Pins Operating Supply Voltage:3.3V Additional Feature:PIPELINED OR FLOW-THROUGH ARCHITECTURE I/O Type: COMMON Freguency at 133MHz 133MHz terminals
70V3399S133PRFI8 Applications
There are a lot of Integrated Device Technology (IDT) 70V3399S133PRFI8 Memory applications.