Surface Mount 100 Pin Memory IC 144 kb kb 14mm mm 195mA mA 18b b
SOT-23
70V35L20PFI8 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
7 Weeks
Mount
Surface Mount
Package / Case
TQFP
Number of Pins
100
Published
2008
JESD-609 Code
e0
Pbfree Code
no
Part Status
Active
Moisture Sensitivity Level (MSL)
3 (168 Hours)
Number of Terminations
100
ECCN Code
EAR99
Terminal Finish
Tin/Lead (Sn85Pb15)
Max Operating Temperature
85°C
Min Operating Temperature
-40°C
Terminal Position
QUAD
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
240
Number of Functions
1
Supply Voltage
3.3V
Terminal Pitch
0.5mm
Time@Peak Reflow Temperature-Max (s)
20
Pin Count
100
Operating Supply Voltage
3.3V
Temperature Grade
INDUSTRIAL
Interface
Parallel
Max Supply Voltage
3.6V
Min Supply Voltage
3V
Memory Size
18kB
Number of Ports
2
Nominal Supply Current
195mA
Memory Type
RAM, SDR, SRAM
Access Time
20 ns
Organization
8KX18
Output Characteristics
3-STATE
Address Bus Width
26b
Density
144 kb
Standby Current-Max
0.005A
I/O Type
COMMON
Sync/Async
Asynchronous
Word Size
18b
Standby Voltage-Min
3V
Length
14mm
Height Seated (Max)
1.6mm
Width
14mm
Thickness
1.4mm
Radiation Hardening
No
RoHS Status
RoHS Compliant
Lead Free
Contains Lead
70V35L20PFI8 Product Details
70V35L20PFI8 Overview
There is a memory type RAM, SDR, SRAM for this type of device. The file is embedded in a TQFP case. This chip has an 18kB size of memory on it, so a lot of data can be stored on it. The chip contains 100 terminations. As many as 1 functions are supported for comprehensive working. An 3.3V supply is required for this ic memory chip to operate properly. A package of 100 pins is used to protect this memory device. The memory device has 100 pins, which means that it has 100 memory locations, which indicates it is an 100-bit device. This memory runs on an 3.3V operating supply voltage. Memory chips configured with Surface Mount mounting achieve high efficiency and simplicity. The nominal supply current of this memory component is 195mA. Each memory address is accessed by one of 2 ports on this chip. An COMMON-bit memory mapped I/O port address is used to address this device. There must be at least an -40°C operating temperature for this device. The part should not be operated at temperatures above 85°C degrees Celsius as otherwise, the part may be damaged due to the excessive amount of heat. This part should have a minimum supply voltage of 3V. A maximum voltage of 3.6V shall be allowed for its operating voltage.