Surface Mount 100 Pin Memory IC 18 Mb kb 20mm mm 275mA mA 18b b
SOT-23
71T75802S200PFG Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
8 Weeks
Mount
Surface Mount
Package / Case
TQFP
Number of Pins
100
Published
2012
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
3 (168 Hours)
Number of Terminations
100
Terminal Finish
Matte Tin (Sn) - annealed
Max Operating Temperature
70°C
Min Operating Temperature
0°C
Additional Feature
PIPELINED ARCHITECTURE
Subcategory
SRAMs
Technology
CMOS
Terminal Position
QUAD
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
1
Supply Voltage
2.5V
Terminal Pitch
0.65mm
Frequency
200MHz
Time@Peak Reflow Temperature-Max (s)
30
Pin Count
100
Operating Supply Voltage
2.5V
Temperature Grade
COMMERCIAL
Interface
Parallel
Max Supply Voltage
2.625V
Min Supply Voltage
2.375V
Memory Size
2.3MB
Number of Ports
1
Nominal Supply Current
275mA
Memory Type
RAM, SDR, SRAM
Frequency (Max)
200MHz
Access Time
3.2 ns
Output Characteristics
3-STATE
Address Bus Width
20b
Density
18 Mb
Standby Current-Max
0.04A
I/O Type
COMMON
Sync/Async
Synchronous
Word Size
18b
Standby Voltage-Min
2.38V
Length
20mm
Width
14mm
Thickness
1.4mm
Radiation Hardening
No
RoHS Status
RoHS Compliant
Lead Free
Lead Free
Pricing & Ordering
Quantity
Unit Price
Ext. Price
72
$25.66722
$1848.03984
71T75802S200PFG Product Details
71T75802S200PFG Overview
In this case, the memory type of the device can be classified as RAM, SDR, SRAM. An embedded TQFP case surrounds memory ics. It is estimated that the memory size on the chip is 2.3MB. It is planted on the chip with 100 terminations. It supports up to 1 functions for comprehensive operation. There is a requirement for 2.5V to be supplied to this ic memory chip in order to operate. The ic memory chip comes in a package with 100 pins that allows it to be connected to a computer. The memory device has a total of 100 pins, thus indicating that it has a total of 100 memory locations. It is noted that the operating supply voltage of this memory is 2.5V. This chip uses Surface Mount mounting, a straightforward, high-efficiency method of mounting. It is rated 275mA for its nominal supply current when it comes to the memory component. This chip is not only loaded with advantages, but it also comes with PIPELINED ARCHITECTURE, which boosts the performance of your system. Several ports on this chip are used to access one memory address for reading and writing. I/O port addresses in this device are mapped to COMMON bits from the device's memory. In order for this device to function properly, its operating temperature must not be less than 0°C. The temperature should not exceed 70°C degrees Celsius. SRAMs components are usually considered types of this component. This memory ics should not be operated with a voltage below 2.375V volts at the minimum. There shall be a voltage limit of 2.625V for its operation. Using this memory chip, you will be able to process data at a speed of 200MHz times per second. This Memory chip is capable of 200MHz max frequency.
71T75802S200PFG Features
Package / Case: TQFP 100 Pins Operating Supply Voltage:2.5V Additional Feature:PIPELINED ARCHITECTURE I/O Type: COMMON Freguency at 200MHz 200MHz terminals
71T75802S200PFG Applications
There are a lot of Integrated Device Technology (IDT) 71T75802S200PFG Memory applications.