71V124SA15YGI Overview

As far as its memory type goes, it falls into the RAM, SDR, SRAM - Asynchronous category. There is 128kB of memory on the chip. There are 32 terminations on the chip. There are 1 functions supported by this part as part of the comprehensive working process. The memory device is designed to be supplied with an 3.3V volt power supply in order to operate properly. In this ic memory chip, there is an 32-pin package that encloses the device. It is worth noting that this memory device has 32 pins, which indicates it has 32 memory locations. This memory chip has an operating supply voltage of 3.3V. As a result of the Surface Mount mounting configuration, this chip is designed to be straightforward, high-efficiency, and easy to install. As far as the nominal supply current of this memory component is concerned, it is rated at 120mA. Using 1 ports, a single memory address can be read and/or written. A memory map of COMMON bits has been added to the I/O port addresses of this device. Memory ics must operate at a temperature of at least -40°C. Temperatures over 85°C°C are not recommended. There is a common misconception that this component is a type of SRAMs. If this part is to be used, the minimum supply voltage should not be less than 3V volts. The operating voltage of the memory ics shall not exceed 3.6V.

71V124SA15YGI Features

32 Pins
Operating Supply Voltage:3.3V
I/O Type: COMMON

71V124SA15YGI Applications

There are a lot of Integrated Device Technology (IDT)
71V124SA15YGI Memory applications.

• multimedia computers
• networking
• personal computers
• servers
• supercomputers
• telecommunications
• workstations,
• DVD disk buffer
• data buffer
• nonvolatile BIOS memory