Surface Mount 100 Pin Memory IC 4.5 Mb kb 20mm mm 325mA mA 36b b
SOT-23
71V2546S150PFG Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
12 Weeks
Mount
Surface Mount
Package / Case
TQFP
Number of Pins
100
Published
2009
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
3 (168 Hours)
Number of Terminations
100
Terminal Finish
Matte Tin (Sn) - annealed
Max Operating Temperature
70°C
Min Operating Temperature
0°C
Additional Feature
PIPELINED ARCHITECTURE
Subcategory
SRAMs
Technology
CMOS
Terminal Position
QUAD
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
1
Supply Voltage
3.3V
Terminal Pitch
0.65mm
Frequency
150MHz
Time@Peak Reflow Temperature-Max (s)
30
Pin Count
100
Operating Supply Voltage
3.3V
Temperature Grade
COMMERCIAL
Interface
Parallel
Max Supply Voltage
3.465V
Min Supply Voltage
3.135V
Memory Size
512kB
Number of Ports
1
Nominal Supply Current
325mA
Memory Type
RAM, SDR, SRAM
Frequency (Max)
150MHz
Access Time
3.8 ns
Output Characteristics
3-STATE
Address Bus Width
17b
Density
4.5 Mb
Standby Current-Max
0.04A
I/O Type
COMMON
Sync/Async
Synchronous
Word Size
36b
Length
20mm
Width
14mm
Thickness
1.4mm
Radiation Hardening
No
RoHS Status
RoHS Compliant
Lead Free
Lead Free
Pricing & Ordering
Quantity
Unit Price
Ext. Price
144
$5.04507
$726.49008
71V2546S150PFG Product Details
71V2546S150PFG Overview
As far as its memory type goes, it falls into the RAM, SDR, SRAM category. TQFP case encloses it. There is 512kB of memory on the chip. There are 100 terminations on the chip. There are 1 functions supported by this part as part of the comprehensive working process. The memory device is designed to be supplied with an 3.3V volt power supply in order to operate properly. In this ic memory chip, there is an 100-pin package that encloses the device. It is worth noting that this memory device has 100 pins, which indicates it has 100 memory locations. This memory chip has an operating supply voltage of 3.3V. As a result of the Surface Mount mounting configuration, this chip is designed to be straightforward, high-efficiency, and easy to install. As far as the nominal supply current of this memory component is concerned, it is rated at 325mA. Despite all its benefits, this memory chip also offers PIPELINED ARCHITECTURE for improved system performance. Using 1 ports, a single memory address can be read and/or written. A memory map of COMMON bits has been added to the I/O port addresses of this device. Memory ics must operate at a temperature of at least 0°C. Temperatures over 70°C°C are not recommended. There is a common misconception that this component is a type of SRAMs. If this part is to be used, the minimum supply voltage should not be less than 3.135V volts. The operating voltage of the memory ics shall not exceed 3.465V. There is an 150MHz frequency with which this memory chip processes data. In this Memory chip, the maximum frequency is 150MHz.
71V2546S150PFG Features
Package / Case: TQFP 100 Pins Operating Supply Voltage:3.3V Additional Feature:PIPELINED ARCHITECTURE I/O Type: COMMON Freguency at 150MHz 150MHz terminals
71V2546S150PFG Applications
There are a lot of Integrated Device Technology (IDT) 71V2546S150PFG Memory applications.