Surface Mount 64 Pin Memory IC 8 kb kb 10mm mm 145mA mA 8b b
SOT-23
71V30L35TFI8 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
7 Weeks
Package / Case
LQFP
Mount
Surface Mount
Number of Pins
64
Published
2009
JESD-609 Code
e0
Pbfree Code
no
Part Status
Active
Moisture Sensitivity Level (MSL)
3 (168 Hours)
Number of Terminations
64
ECCN Code
EAR99
Terminal Finish
Tin/Lead (Sn85Pb15)
Max Operating Temperature
85°C
Min Operating Temperature
0°C
Subcategory
SRAMs
Technology
CMOS
Terminal Position
QUAD
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
240
Number of Functions
1
Supply Voltage
3.3V
Terminal Pitch
0.5mm
Time@Peak Reflow Temperature-Max (s)
20
Pin Count
64
Operating Supply Voltage
3.3V
Temperature Grade
INDUSTRIAL
Interface
Parallel
Max Supply Voltage
3.6V
Min Supply Voltage
3V
Memory Size
1kB
Number of Ports
2
Nominal Supply Current
145mA
Memory Type
RAM, SDR, SRAM
Access Time
35 ns
Organization
1KX8
Output Characteristics
3-STATE
Address Bus Width
10b
Density
8 kb
I/O Type
COMMON
Sync/Async
Asynchronous
Word Size
8b
Standby Voltage-Min
3V
Height Seated (Max)
1.6mm
Width
10mm
Length
10mm
Thickness
1.4mm
Radiation Hardening
No
RoHS Status
RoHS Compliant
Lead Free
Contains Lead
71V30L35TFI8 Product Details
71V30L35TFI8 Overview
As far as memory types are concerned, RAM, SDR, SRAM is considered to be its memory type. In the case of LQFP, it is embedded within the case. A memory chip with a capacity of 1kB is used on this device. On the chip, there are 64 terminations that are planted. The part supports at least 1 functions to ensure a comprehensive working process. In order to function properly, this ic memory chip should be powered by a voltage of 3.3V. The memory device has an 64-pin package, which encloses it in a small package. I have noticed that the memory device has 64 pins, which indicates that it has 64 locations in the memory. According to the datasheet, this memory chip operates at an operating voltage of 3.3V. In this chip, the Surface Mount mounting method is used, a straightforward, high-efficiency mounting method. In terms of its nominal supply current, this memory component has a rating of 145mA. The memory chip has 2 ports for granting read/write access to one memory address. There are I/O ports on this memory ics that have COMMON-bit memory mapping. Temperatures below 0°C should not be used with this memory ics. It is recommended that operation of the part be restricted to temperatures not exceeding 85°C, otherwise damage to the part may occur as a result of overheating. In most cases, this memory ics is regarded as being a type of SRAMs. It is recommended that this part be supplied with at least 3V volts. The operating voltage shall not exceed 3.6V.