Surface Mount 100 Pin Memory IC 2 Mb kb 20mm mm 200mA mA 32b b
SOT-23
71V632S5PFGI Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
7 Weeks
Mount
Surface Mount
Package / Case
TQFP
Number of Pins
100
Published
2015
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
3 (168 Hours)
Number of Terminations
100
Terminal Finish
Matte Tin (Sn) - annealed
Max Operating Temperature
85°C
Min Operating Temperature
-40°C
Additional Feature
ALSO REQUIRES 3.3V I/O SUPPLY
Subcategory
SRAMs
Technology
CMOS
Terminal Position
QUAD
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
1
Supply Voltage
3.3V
Terminal Pitch
0.65mm
Frequency
100MHz
Time@Peak Reflow Temperature-Max (s)
30
Pin Count
100
Operating Supply Voltage
3.3V
Temperature Grade
INDUSTRIAL
Interface
Parallel
Max Supply Voltage
3.63V
Min Supply Voltage
3.135V
Memory Size
256kB
Number of Ports
1
Nominal Supply Current
200mA
Memory Type
RAM, SDR, SRAM
Frequency (Max)
100MHz
Access Time
5 ns
Organization
64KX32
Output Characteristics
3-STATE
Address Bus Width
16b
Density
2 Mb
I/O Type
COMMON
Sync/Async
Synchronous
Word Size
32b
Length
20mm
Width
14mm
Thickness
1.4mm
Radiation Hardening
No
RoHS Status
RoHS Compliant
Lead Free
Lead Free
Pricing & Ordering
Quantity
Unit Price
Ext. Price
576
$5.04851
$2907.94176
71V632S5PFGI Product Details
71V632S5PFGI Overview
As far as its memory type goes, it falls into the RAM, SDR, SRAM category. TQFP case encloses it. There is 256kB of memory on the chip. There are 100 terminations on the chip. There are 1 functions supported by this part as part of the comprehensive working process. The memory device is designed to be supplied with an 3.3V volt power supply in order to operate properly. In this ic memory chip, there is an 100-pin package that encloses the device. It is worth noting that this memory device has 100 pins, which indicates it has 100 memory locations. This memory chip has an operating supply voltage of 3.3V. As a result of the Surface Mount mounting configuration, this chip is designed to be straightforward, high-efficiency, and easy to install. As far as the nominal supply current of this memory component is concerned, it is rated at 200mA. Despite all its benefits, this memory chip also offers ALSO REQUIRES 3.3V I/O SUPPLY for improved system performance. Using 1 ports, a single memory address can be read and/or written. A memory map of COMMON bits has been added to the I/O port addresses of this device. Memory ics must operate at a temperature of at least -40°C. Temperatures over 85°C°C are not recommended. There is a common misconception that this component is a type of SRAMs. If this part is to be used, the minimum supply voltage should not be less than 3.135V volts. The operating voltage of the memory ics shall not exceed 3.63V. There is an 100MHz frequency with which this memory chip processes data. In this Memory chip, the maximum frequency is 100MHz.